30m Waterproof 960P Watch Camera DVR

1.Vioce Recording 2. Video Recording 3. Picture Shooting 4. PC Camera 5. HD 1280*960, 30FPS 6. Waterproof
SKU: WAC0042
$45.00

1.Vioce Recording
2. Video Recording
3. Picture Shooting
4. PC Camera
5. HD 1280*960, 30FPS
6. Waterproof

 

Parts Description:


1 Indicator: Status Indicator (7): blue light is the photo taking mode; red light for
the video recording mode.

2 Button(4): Touch the button for the start, stop, video and photo.

3 Socket(1): The 2.5 – 4 pin USB socket is used to connect with computer or charger.
It is the interface for data transfer and charging.

4 Microphone and camera: Microphone (2) is used to get the sound signal ;(3) is used
to get the image signal.

5 Time setting: It is to set the time of this watch.

ON/OFF: Press button (4) for 2 seconds to start the device. It gets into the video
recording mode. Meanwhile the red video indicator is on. When the indicator light is
on, press the button for 3 seconds. The red and blue lights are on at the same time,
the device will automatically save the current video file and shutdown. Under condition
that no light is on, press operation button (4) for 1 second to confirm the status.

When this device is in standby video or photo mode, press mode button (6) for 1 second
to change the mode.

1.Take photo: In the photo-taking mode, the device enters into the standby status for
photo-taking. Now the blue light is on. Press the button (4) for 1 second. One flashing
blue light indicates that the device completes the photo taking and file saving job.
Then it returns to the standby mode.

Note: Make sure there is adequate light in the surrounding and the camera is not blocked by other items. Keep the camera upright and stable. And the object should be more than 50cm from the camera.

2.Record video: In the video mode, the device enters into the standby status for video
recording. Now the red light is on. Press the button (4) for short time to start the
video recording. The red light flashes slowly. In order to save system power, after
the beginning of the video taking for 5 seconds, the indicator light will automatically be off while the video is still in the recording mode. If need confirm the video status or have a new operation, please press the any button once to see the status indicator. When the red indicator light flashes, press the button for short time to stop recording and save the file. Afterward the red light returns to ON mode; In order to ensure the safety and the size of the file, the system will automatically save file every 50 minutes once, and continue the video recording.
Note: In order to ensure good sound effect of recording, do not block the microphone
hole. The other operation notes are as same as Point d.

Parameters:

Video format AVI
Video encoding M-JPEG
Video resolution 1280*960 VGA
Video frame rate 30fps
Media playing software Attached software of the operating system or
Mainstream audio and video media playing software
Picture format JPG
Picture pixels 5M Pix
The ratio of image 4:3
Supporting system Windows me/2000/xp/2003/vista;Mac O/S;Linux;
Battery capacity 200mAh
Working time About 70 minutes
Charging voltage DC-5V
Interface type Φ2.5 4 Pin USB
Storage support Nand flash
Battery type high-capacity lithium polymer

Product tags