-4 in 1 Multi purpose design
-1280X960 High definition video recording function
-2 Mega pixels.
-Portable camera features
-Web camera function
-Audio-detection recording function
Special Design,only 13mm for diameter pen
High-definition video 1280×960 @30 fps,full real-time video
8GB Built-in memory, about 30,000 photos
Video data can be saved and used as flash disk
Video data with date and time
You can charge while recording, use for a long time.
Containing replaceable keyring lipstick-style lid,light to carry with.
Easy to write, writing fluently.
High resolution recording /Photograph/ Webcam/ Audio detection camera Four-in-one
Recording resolution 1280x960 pixel
Recording frames 30 FPS
Image ratio 4：3
Recording format AVI
Video encoding M-JPEG
Time setting Yes/No(You can set free)
Photo resolution 200 Mega pixels，1600x1200 pixel
Photo format JPG
Web cam 320x240 pixel
Audio-detection recording ≧45 db auto-recording
Memory built in 8GB
Support system Windows me/2000/2003/xp/Vista/Mac OS
Transfer interface: Mini 5 pin USB
Charging Voltage: DC 5V
Battery: 150mAh, Polymer lithium battery
Dimension Length:15.4cm Diameter：1.3cm
Net Weight: 51g
．Web cam recording time and photo pieces
．Audio-detection recording Mode
1.Video: Press the mode button and switched to "L" position. Open the camera to enter the standby mode,the blue indicator light shine constantly. Without pressing any button, when the external environment volume is higher than a certain range , they automatically begin recording while the blue lights began to flash.
2.Stop recording:When recording, first press the power / REC button, then immediately stop recording and return to standby mode; if the environment volume is greater than 45db ,it will start recording automatically.
Press the mode button and switched to "M" position. Open the camera to enter to the standby mode. At this time, the green indicator light shine constantly, press a power/REC button for pictures taken. When the green indicator light flashes,it will return to standby mode.
1. Please install the webcam driver (CD-ROM) in the path to “the location of the CD-ROM drive\Driver\driver.exe”.
2.After the installation is complete, please make sure the device is in standby mode.
(the blue light shine constantly)
3.Use the USB data transfer cable to connect the products and computer.
4. At this moment, the computer will find the device “standard Camera”, waiting for the system after capturing installment. Then you can use WEBCAM functions.
Note: If connecting with the computer and shows removable device,please re-plug again with “USB computer cable”.